Serviços

Laboratórios

Milton Mori

DEPro - Departamento de Engenharia de Processos

Área de Concentração:  Desenvolvimento de Processos Químicos

Telefone: (19) 3521-3963 

E-mail:

Currículo Lattes Link)

 

Formação 

  • Engenharia Química, Universidade Federal do Paraná, 1972.
  • Mestre em Engenharia Química, University of Michigan, EUA, 1979.
  • Doutor em Engenharia Química, North Carolina State University, EUA, 1983.


Áreas de Pesquisa
  • Fluidodinâmica Computacional (CFD) em Refino de Petróleo.
  • Fluidodinâmica Computacional (CFD) em Processos Industriais.


Publicações Relevantes

 

  • Ropelato, Karolline; Castro, Antônio; Mori, M.; Geraldelli, Washington. Empty spray sections of vacuum towers: heat and mass transfer with a CFD approach. Chemical Product and Process Modeling, v. 5, p. 18, 2010.

  • Decker, Rodrigo Koerich; Meier, H.F.; Mori, M.; Fritsching, U. Analysis of particle interaction with coherent structures in a two-phase mixing jet. Multiphase Science and Technology, v. 22, p. 1-30, 2010.

  • Silva, Marcela K.; D'Ávila, Marcos Akira; Mori, M. CFD modeling of a bubble column with an external loop in the heterogeneous regime. Canadian Journal of Chemical Engineering, v. 99, p. 1-11, 2010.

  • Mattos, E.M.; Guirardello, Reginaldo; Mori, M.; Nunhez, José Roberto. Modeling and simulation of a pseudo-three slurry bubble column reactor applied to the process of petroleum hydrodesulfurization. Computers and Chemical Engineering, v. 33, p. 1115-1122, 2009.

  • Dionísio, R.P.; Silva, Marceloa, K.; D'Ávila, Marcos Akira; Mori, M. Three-dimensional simulation of bubbly flows with different geometrical approaches. International Review of Chemical Engineering, v. 1,p. 467-473, 2009.

  • Bastos, J.C.S.C.; Rosa, Leonardo Machado da; Mori, M.; Marini, F.; Martignoni, Waldir P. Modeling and simulation of a gas-solid dispersion flow in a high-flux circulatin fluidized bed (HFCFB) riser. Catalysis Today, v. 130, p. 460-470, 2008.

  • Vegini, Atilano Antônio; Meier, H.F.; Iess, J.J.; Mori, M. Computational fluid dynamics ( CFD) analysis of cyclone separators connected in series. Industrial & Engineering Chemistry Research, v. 47, p. 192-200, 2008.

  • Fudihara, T.J.; Goldstein Jr, Leonardo; Mori, M. A numerical investigation of the aerodynamics of a furnace with a movable block burner. Brazilian Journal of Chemical Engineering, v. 24, p. 233-248, 2007.

  • Santos, Celso Murilo dos; Dionísio, R.P.; Cerqueira, Henrique Soares; Aguiar, E.F.S.; D'Ávila, Marcos Akira; Mori, M. Three-dimensional gas-liquid CFD simulations in cylindrical bubble columns. International Journal of Chemical Reactor Engineering, v. 5, p.1/A90-20/a90, 2007.

  • Mori, M.; Bernardo, Sérgio; Peres, Alexandre de Paula; Dionísio, R.P. 3-D computational fluid dynamics of gas and gas-particle flows in a cyclone with different inlet section angles. Powder Technology, Irlanda, v. 162, p 190-200, 2006.

  • Bernardo, Sérgio; Peres, Alexandre de Paula; Mori, M. Avaliação da influência da inclinação da seção de entrada em ciclones de escala industrial. Petro & Química, Valete Editora Técn. Com. Ltda., v. XXVIII, n. 272, p. 143-151, 2005.

  • Bernardo, Sérgio; Peres, A.P.; Mori, M. Computational study of cyclone flow fluid dynamics using a different inlet section angle. Engenharia Térmica, v. 4, n. 1, p. 18-23, 2005.

  • Decker, Rodrigo Koerich; Meier, Henry França; Mori, M. Validação de modelo tridimensional para o escoamento gás-sólido diluído vertical e horizontal por técnicas de fluidodinâmica computacional (CFD). Boletim Técnico da Petrobrás (Online), Rio de Janeiro - RJ, v. 47, n. 1-2, 2004.

  • Esquerre, Karla Patrícia Santos Oliveira Rodriguez; Seaborg, D.; Mori, M.; Bruns. R. Application of steady-state and dynamic modeling for the prediction of the BOD of an aerated lagoon at a pulp and paper mill - Part !: linear approaches. Chemical Engineering Journal, Nova Zelândia, v. 104, p. 73-81, 2004.

  • Esquerre, Karla Patrícia Santos Oliveira Rodriguez; Mori, M.; Seaborg, D.; Bruns, R. Application of a steady-state and dynamics modeling for the prediction of the BOD of an aerated lagoon at a pulp and paper mill - Part II: nonlinear approaches. Chemical Engineering Journal, Nova Zelândia, v. 105, p. 61-69, 2004.

  • Coutinho, S.A.; Alves, J.J.N.; Martignoni, Waldir P.; Mori, M. Modeling and simulation of gas-solid flows in riser reactors. Advances in Fluid Mechanics, v. 37, p. 199-208, 2004.

  • Esquerre, Karla P. Oliveira; Mori, M.; Bruns, R.; Costa, Aline Carvalho da. Simulation of aerated lagoon using artificial neural networks and multivariate regression techniques. Applied Biochemistry and Biotechnology, USA, v. 105, p. 437-449, 2003.

  • Fudihara, Takeu Jonas; Goldstein Jr, Leonardo; Mori, M. The three-dimensional numerical aerodynamics of a movable block burner. Brazilian Journal of Chemical Engineering, Campinas, SP, Brasil, v. 20, n. 4, p. 391-401, 2003.

  • Vegini, A.A.; Noriler, D.; Meier, Henry França; Soares, C.; Barros, A.A.C.; Mori, M. A new role for reduction in pressure drop in cyclones using computational fluid dynamics techniques. Brazilian Journal of Chemical Engineering, Campinas, SP, Brazil, v. 21, n. 1, p. 93-101, 2003.

  • Meier, Henry França; Ropelato, K.; Mori, M.; Forster, H.; Iess, J.J. Application of computational fluid dynamics (CFD) for cyclone evaluation and design, Part 1. Zement - Kalk - Gips International, Alemanha, v. 55, n. 4, p. 2, 12, 2002.

  • Meier, Henry França; Ropelato, K.; Mori, M.; Forster, H.; Iess, J.J. Computational fluid dynamics (CFD) for cyclone evalutation and design, Part 2. Computational Fluid Dynamics (CFD) zur Berechnung und Auslegung von Zyklonen, Teil 2. Zement - Kalk - Gips International, Alemanha, v. 55, n. 6, p. 58-64, 2002.

  • Esquerre, Karla P. Oliveira; Bruns, R.; Mori, M. Simulation of industrial wastewater treatment plant using artificial neural networks and principal components analysis. Brazilian Journal of Chemical Engineering, Campinas - SP, v. 19, n. 4, p. 365-370, 2002.

  • Alves, J.J.N.; Mori, M.; Martignoni, Waldir P. Fluid dynamics modeling and simulation of circulating fluidized bed reactors: importance of the interface turbulence transfer. Journal of the Brazilian Society Mechanical Sciences, Brasil, v. XXVIII, n.1, p. 91-104, 2001.

  • Gontarski, C.A.U.; Mori, M.; Rodrigues, P.R.; Prenem, F. Simulation of an industrial wastewater treatment plant using artificial neural networks. Computers and Chemical Engineering, Inglaterra, v. 24, p. 1719-1724, 2000.

  • Meier, Henry França; Mori, M. Anisotropic behavior of the Reynolds stress in gas and gas-solid flows in cyclones. Powder Technology, USA, v. 101, p. 108-119, 1999.

  • Alves, J.J.N.; Mori, M. Analysis of parametric sensitivity in the kinetic theory of granular flows on the prediction of the fluid dynamic of circulating fluidized bed reactors. Computers and Chemical Engineering, Inglaterra, v. 23, p. 757-760, 1999.

  • Alves, J.J.N.; Mori, M. Fluid dynamic modeling and simulation of circulating fluidized reactors: analysis of particle phase stress models. Computers and Chemical Engineering, Inglaterra, v. 22, p. S763-S766, 1998.

  • Meier, Henry França; Mori, M. The eulerian-eulerian-lagrangian model for cyclone simulation. Computational Fluid Dynamic, John Wiley Sons, New York, v. 2, p. 1206-1211, 1998.

  • Alves, J.J.N.; Mori, M. On the numerical oscillation in the circulating fluidized bed reactors using the finite volume method with collocated grids. Computational Fluid Dynamics, John Wiley Sons, New York, v. 2, p. 705-711, 1998.

  • Meier, Henry França; Mori, M. Gas solid flow in cyclones: the eulerian-eulerian approach. Computers and chemical engineering, Inglaterra, v. 22, p. S641-S644, 1998.

  • Meier, Henry França; Alves, J.J.N.; Mori, M. Comparison between staggered and collocated grids in the finite volume method performance for single and two phase flows. Computers and Chemical Engineering, Inglaterra, v. 23, n. 3, p. 245-260, 1998.

  • Fudihara, T.J.; Mori, M.; Laurito, J.A.; Spitzner Jr, R.K. Perfis axiais de temperaturas e análises de sensitividade paramétrica em um incinerador tipo forno rotativo. Revista de Ciência e Tecnologia, UNIMEP - Piracicaba - SP, v. 6, n. 1, p. 29-46, 1997.

  • Vegini, Atilano Antônio; Mori, M. Simulation of a carbon monoxide purification process. Revista Internacional Información Tecnológica, Chile, v. 7, n. 1, p. 79-84, 1996.

  • Pedrosa Neto, P.; Mori, M. Simulation and optimization of the section of fractionation and recovery of effluent products from the fluid catalytic cracking unit. Revista Internacional Información Tecnológica, Chile, v. 7, n. 2, p. 81-86, 1996.

  • Pedrosa Neto, P.; Mori, M. Simulação e otimização da seção de fracionamento e recuperação de produtos da unidade de craqueamento catalítico fluido-FCCU - Fractionation and gas recovery sections simulation and optimization. Boletim Técnico da Petrobrás, Brasil, v. 38, n. 2, p. 87-106, 1995.

  • Souza, Daniel Rolla de Camargo; Mori, M.; Vieira, U.N. Software aplicativo para simulação de ciclones através de métodos empíricos ou semi-empíricos. Revista Brasileira de Engenharia Química, Brasil, p. 27-34, 1995.

  • Gontarski, C.A.U.; Mori, M. Sensitividade paramétrica do reator de leito móvel para aproveitamento de finos de xisto com gás de aquecimento. Revista de Engenharia e Ciência Aplicada, São Paulo, v. 1, p. 21-36, 1993.

  • Nunhez, José Roberto; Mori, M.; D'Ávila, A.S.G. Fitting thermodynamic data using the modified spline technique. Computers and Chemical Engineering, Inglaterra, v. 17, n. 11, p. 1091-1099, 1993.

  • Gontarski, C.A.U.; Mori, M.; Martignoni, Waldir P. Aplicação do método de colocação ortogonal na simulação de um reator de arraste. Revista do Tecnológico, Belém, PA, v.3, n. 1, p. 134-149, 1991.

  • Mori, M.; White, R.; Kuruvilla, V. Application of the finite element method to a linear diffusion problem with reversible trapping and on eroding boundary. Nuclear Energy Journal, Inglaterra, v. 10, n. 11, p. 579-587, 1983.